Cooler Master B700 700W Power Supply Unit Specifications
In The Box
| Sales Package | PSU and Respective Screws |
General
| Brand | Cooler Master |
| Power Output | 700 W |
| Series | B Series |
| ATX & EPS Version | ATX 12V v2.3 |
| Model Name | Power Supply B700 |
| Power Rail | 1 x 12V Power Rails |
| Part Number | RS-700-ACAB-D3 |
Other Features
| Additional Features | Blue Angel and ErP 2010 Requirements |
Power
| Power Factor Correction (PFC) | Active PFC with Value of 0.9 |
| Hold Up Time | 12 ms |
| Input Frequency | 47 - 63 Hz |
| Power Good Signal | 100 ~ 500 ms |
| Efficiency | 85 % |
| Mean time between failures (MTBF) | 100000 hr |
Connectivity
| Motherboard | 1 Motherboard Connector with 20 + 4 pin |
| CPU | 1 CPU Connector with 4 + 4 pin |
| PCI-e | 4 PCI-e 6+2 pin |
| SATA | 6 SATA Cables |
| Floppy | 1 Floppy Connector with 4 pins |
| Peripheral | 3 Peripheral Connector with 4 pins |
| Peripheral + Floppy | 4 Peripheral + Floppy Pin |
Features
| Protection | Over Voltage Protection, Over Power Protection, Over Temperature Protection, Over Current Protection, Short Circuit Protection |
| Safety Standards | CE, C-tick, TUV, GOST |
| Fan Type | 1 x 120 mm Intelligent Fan Speed Control |
| Temperature | 0 to 40 °C (Operating Temperature) |
Dimensions
| Width x Height x Depth | 150 x 86 x 140 mm |
Disclaimer: Specifications shown may be different from the actual product. We cannot guarantee that the information provided on this page is 100% correct. Please check with the retailer before purchasing.